Profiling the Edge of a (Man-Made) Granite Countertop - Toolocity Makes It Easy!
January 30, 2012 - After a restless night of sleep, we arrived back at the building early on Saturday to survey the damage in the light of day. Blackmon Mooring worked until midnight, and their crew of 20-25 workers did an excellent job of removing much of the wet and damaged insulation. But much like an iceberg, the actual damage turned out to be much greater than what we first surveyed that morning. The fireman had used a great deal of water and foam in the attic, and we determined that all the Sheetrock on the walls and ceiling along with the insulation would have to come out. This was a big job.
Since we could not work in the building, we decided to turn our attention to the outside work we had planned to do the week of January 30th. Earlier in the month I checked with some local contractors on the cost to join the three pieces of the summer kitchen counter top together, and put an edge (called a profile) on it. The cost was outside our budget, and because we are at the end of the project and funds are really low, we had to find an alternative. I turned to Youtube and found a very helpful video from Toolocity.com - that shows the step-by-step procedure. This looked like something we could tackle, so I called the company and asked for their advice. We talked with Marshall Pan who helped us determine exactly what we needed for our job.
Our order included the following: A Bosch variable speed grinder, a 3/8" radius diamond hand profiler; a set of dry/wet diamond polishing pads (7 pieces from 50 grit to 3000 grit, a liter of Tenax transparent knife-grade polyester with hardener, instructional DVD and a workshop apron).
We ordered and received the package from Toolocity.com in three days. They have a complete line of diamond tools for granite counter top fabrication, marble and concrete floor restoration. They also offer high quality tools for polishing and grinding.
The counter top is FuzeGlass - a man-made material that is really amazing. It looks natural and the imbedded glass really brings the surface to life. It is hard to believe it is made from low carbon cement and recycled glass. The FuzeGlass was provided by Brian Egan the President of Southwest Building Products. Here is the step-by-step installation process we followed to bond, profile and polish the FuzeGlass counter top.
7) We then polished the surface of the FuzeGlass with the fine pad, and then cleaned, sealed and polished it with a kit we bought at Home Depot.
The job turned out great and there is a great deal of satisfaction in sitting at the bar and enjoying our new countertop. Thanks again to Toolocity and Southwest Building Production for all the help!
Category: Container Building,